Bath · BA2 · Decking & Fencing by area

Decking & Fencing in Bathwick

Decking and fencing — often quoted together as one garden project. TM Carpentry builds subframe, fits boards, sets posts and panels. Material choice is the main decision: softwood is the budget option, hardwood lasts longer, composite is low-maintenance but mid-priced. We talk through what fits the site, the use and the budget. Available across Bath, Bristol and Keynsham — see the areas covered for specific neighbourhoods.

10+years in the trade
16areas covered
9services in-house
£2Mpublic liability

What's included

Every decking & fencing job covers the items below — always. The exact specification depends on your space and what you want it to do.

  • Site clearance and waste removal (optional)

  • Decking subframe construction

  • Deck board fitting — softwood, hardwood or composite

  • Fence post setting (concrete or post spikes)

  • Panel or closeboard fence installation

  • Gates and ironmongery

Recent decking and fencing project in Bathwick

Completed timber decking in a sunlit garden, with dining set, lounge seating, BBQ and festoon lights along the boundary fence

Bathwick · Decking & Fencing

From a recent Bathwick job — a decking and matching fence project done together. [Real project story placeholder. Replace with the specific job: the customer, what they wanted, what was tricky about the site, how it turned out. The photo shows a finished deck in use — dining set, lounge seating, festoon lights along the boundary fence.]

What decking and fencing typically look like in Bathwick

Bathwick gardens are typically small — Georgian terraces here have 5–8m of usable rear garden depth, often with a raised terrace and steps down to a lower garden level. Slopes are common on the upper streets (Sydney Buildings, Bathwick Hill). Most Bathwick gardens need compact decking solutions and efficient fencing.

Honest note: The descriptions below are generalisations — what's typical or commonly found in Bathwick, based on the area's documented garden sizes and house types. Every property is different, so Tom will always confirm what's actually there on the site visit before quoting.

Common decking + fencing patterns in Bathwick

Common Bathwick patterns: 3m × 3m low rear decking with softwood or composite boards (sized to fit the small gardens), 4m × 3m raised decking on the wider Victorian semi sections, fence replacement on shared rear boundaries (typically 1.8m close-board timber panels, 4–6 panels per project), and front garden boundary walls in Bath stone or matching render.

Material choices typical for Bathwick

Most Bathwick jobs use softwood close-board fencing (matches Bath stone context, budget-friendly) or cedar (premium look, longer lifespan). Decking is usually softwood or composite — hardwood is rare because the smaller gardens don't justify the premium. Most Bathwick front garden boundaries are Bath stone walls rather than timber fences, which adds to the project cost.

The planning context in Bathwick

Most Bathwick fencing and decking jobs qualify for Permitted Development because the rear gardens are private. Front garden boundaries in Bathwick are usually in a visible position from the street, which means Bath Conservation Area restrictions on front boundaries apply — any wall over 1m or fence over 1m at the front needs an application. Listed Building Consent is needed for any boundary change at a Grade II listed property. Tom will tell you what's needed on the site visit.

Bathwick — common questions

My Bathwick garden is only 5m deep — what decking fits?
5m gives you a 3m × 3m low rear decking comfortably, with 2m of garden remaining. Most Bathwick gardens fit a 3m × 3m or 4m × 3m low decking without overpowering the original garden proportions.
My Bathwick property is Grade II listed — can I change the front boundary?
Listed Building Consent is required for any boundary change at a Grade II listed property. Most Bathwick front garden boundaries are Bath stone walls rather than timber fences, and changing them usually needs LBC. Tom will tell you what's needed on the site visit.
How much does Bathwick decking and fencing cost?
Bathwick decking and fencing jobs typically run £1,200–£2,500 for a 4–6 panel fence replacement, £2,000–£3,500 for a 3m × 3m low rear decking, and £4,000–£7,000 for a combined project. Tom gives fixed-price quotes after the site visit.
How long does the work take?
Most Bathwick decking and fencing jobs take 2–4 days for fencing, 1–2 days for low decking, or 3–5 days for a combined project. Tom gives a fixed schedule with the quote.
Are you VAT registered?
No — below the threshold. Quotes are VAT-free.

More decking and fencing by area

Our step by step process

Every job follows the same six stages. Some are quicker, some are slower — but the order and what to expect at each point is fixed, so you're never wondering what's happening.

  1. 01

    Site visit

    We measure up, check ground conditions and access for materials, discuss material options.

  2. 02

    Quote

    Itemised — labour, materials, waste removal if needed.

  3. 03

    Subframe / posts

    Decking subframe built and levelled, or fence posts concreted in. Sets the line of everything else.

  4. 04

    Boards / panels

    Deck boards screwed down, or fence panels hung and trimmed.

  5. 05

    Finishing

    End caps, gates, ironmongery, site cleared.

Garden decking and fencing in Bath or Bristol

Pick a city to see what's distinctive about decking and fencing there — typical garden sizes, common patterns, material choices, and FAQs — and a curated list of area hubs beneath it.

Get in touch

Ready to talk about your decking & fencing?

Tell us what you have in mind — we'll come back with a written quote and a realistic timeline.

Start a conversation →
Carpenter fixing new closeboard timber fence panels against a tall hedge boundary, with fence posts and rails extending down the garden