Keynsham · BS31 · Timber Extensions by area

Timber Extensions in Keynsham & the villages between

Timber frame extensions — typically cheaper and faster than traditional blockwork, with the same building-regs compliance. TM Carpentry handles the structural carpentry side: frame, roof structure, sheathing and external cladding. Building regs apply regardless of construction method, and Bath has a lot of conservation-area properties where permitted-development rights don't apply. Available across Bath, Bristol and Keynsham — see the areas covered for specific neighbourhoods.

10+years in the trade
16areas covered
9services in-house
£2Mpublic liability

What's included

Every timber extensions job covers the items below — always. The exact specification depends on your space and what you want it to do.

  • Timber frame construction

  • Roof structure (cut and truss)

  • Sheathing and breathable membrane

  • External cladding or render carrier

  • Internal studwork and first-fix carpentry

  • Coordination with bricklayer / groundworker trades

Recent timber extension project in Keynsham & the villages between

Completed timber-frame extension with cedar cladding, bi-fold doors and a paved terrace

Keynsham & the villages between · Timber Extensions

From a recent Keynsham & the villages between job — a rear kitchen extension or side-return addition built on a timber frame. [Real project story placeholder. Replace with the specific job: the customer, what they wanted, what was tricky about the site, how it turned out. The photo shows a completed timber-frame extension with cedar cladding and bi-fold doors.]

What extensions typically look like in Keynsham & the villages between

Keynsham is dominated by 1930s semis, post-war detached houses, and modern estate housing with 12–25m rear gardens, often with back-lane access. Keynsham is outside the Bath and Bristol conservation areas, so most extensions qualify for Permitted Development.

Honest note: The descriptions below are generalisations — what's typical or commonly found in Keynsham & the villages between, based on the area's documented housing stock. Every property is different, so Tom will always confirm what's actually there on the site visit before quoting.

Typical property types

  • 1930s semis
  • Post-war detached houses
  • Modern estate housing

The planning context in Keynsham & the villages between

Most Keynsham extensions qualify for Permitted Development because the area is outside the Bath and Bristol conservation areas. Tom will tell you on the site visit whether PD applies for your specific extension.

Common extension patterns in Keynsham & the villages between

Common Keynsham extension patterns: 5–6m single-storey rear extensions on the 1930s semis, wraparound extensions on the wider plots, and (on the post-war detached houses) two-storey rear extensions. Most extensions use timber cladding or render carrier.

Keynsham & the villages between — common questions

Is Keynsham inside any Conservation Area?
No — Keynsham is outside the Bath and Bristol conservation areas. Most Keynsham extensions qualify for Permitted Development.
My Keynsham 1930s semi has a 15m garden — is that enough for a 6m extension?
Yes — 15m gives you a 6m single-storey rear extension comfortably, with 9m of garden remaining. PD-friendly for a 4m rear extension on an attached house; 6m would need neighbour consultation under PD but is usually approved without a full application.
Can I extend my Keynsham property with a two-storey extension?
Yes — two-storey rear extensions are common on Keynsham's larger plots. Most two-storey extensions need a planning application because they exceed the PD limits, but Keynsham is outside the conservation areas so applications are usually approved within 8 weeks.
What about the villages between Keynsham and Bath/Bristol?
The villages between Keynsham and Bath/Bristol (Bitton, Oldland Common, Willsbridge, etc.) have similar plot sizes to Keynsham itself and are also outside the conservation areas. Most jobs qualify for PD.
Are you VAT registered?
No — below the threshold. Quotes are VAT-free.

More timberextensions by area

    Our step by step process

    Every job follows the same six stages. Some are quicker, some are slower — but the order and what to expect at each point is fixed, so you're never wondering what's happening.

    1. 01

      Planning conversation

      Conservation area? Listed building? Permitted development likely to apply? We confirm before any drawings.

    2. 02

      Architect drawings

      If planning is needed, an architect produces the drawings for the application. If permitted development, drawings go straight to building regs.

    3. 03

      Quote and frame order

      Fixed-price quote for our scope. Factory frame order placed once drawings are signed off — 4–8 week lead time.

    4. 04

      Foundations and groundworks

      Excavation, footings, slab. Usually a separate contractor; we coordinate the schedule.

    5. 05

      Frame raised

      Pre-made timber frame delivered and erected on site, typically in a single day.

    6. 06

      Roof, sheathing, externals

      Roof structure fitted, walls sheathed, breathable membrane and external cladding applied.

    7. 07

      Internals

      Studwork, insulation, first-fix for services. Plasterboard and finishes follow.

    Bespoke timber extensions in Bath or Bristol

    Pick a city to see what's distinctive about timber extensions there — the property types, planning context, and FAQs — and a curated list of area hubs beneath it.

    Get in touch

    Ready to talk about your timber extensions?

    Tell us what you have in mind — we'll come back with a written quote and a realistic timeline.

    Start a conversation →
    Completed timber-frame extension with cedar cladding and bi-fold doors opening onto a terrace